Wiper/Washer Switch Test
WARNING: This page is about a different car, the 1994 Mercury Tracer and 1994 Ford Escort. However, it is still accessible from the selected car via links, so may be relevant.
- Unplug connector from wiper/washer switch. Set rear wiper switch to WIPE position. Check for continuity between switch terminal for Black wire and terminal "B" (Dark Blue/Black wire on mating connector). Replace switch if continuity does not exist.
- Set rear wiper/washer switch to WASH position. Check for continuity between switch terminal for Black wire and terminal "A" (Orange wire on mating connector). Replace switch if continuity does not exist.
- Set rear wiper/washer switch to OFF position. Continuity should not exist between any pair of terminals. Replace switch if continuity exists.