LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1994 >> Probe Base, Standard >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 74 (Engine Controls - Remove/Install/Overhaul - 4.6L) >> Fuel System >> Fuel Pressure Regulator >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Mercury Grand Marquis, 1995 Mercury Cougar, 1995 Lincoln Town Car, 1995 Lincoln Mark VIII, and 1995 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.
  1. If removing fuel pressure regulator while fuel rail assembly is still installed on engine, release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE.
  2. Remove vacuum line at pressure regulator. Remove pressure regulator mounting screws. Remove pressure regulator assembly, gasket and "O" ring.
  3. To install, ensure sealing surfaces are clean. Lubricate new "O" ring with clean engine oil. Install new "O" ring and gasket on regulator. Install fuel pressure regulator on fuel rail assembly, and tighten screws.
scientia non olet · About LEMON Manuals