LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1994 >> Probe Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Controls - Tests W/Codes - EEC-IV (3.8L)) >> Quick Test >> Continuous Monitor Mode (Wiggle Test) >> KOER Wiggle Test Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

KOER Wiggle Test Procedure

WARNING: This page is about a different car, the 1994 Mercury Sable, 1994 Mercury Cougar, 1994 Lincoln Continental, 1994 Ford Thunderbird, and 1994 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.

Connect test equipment. See Figure. Start engine. Activate self-test using jumper lead or diagnostic tester. Wait 10 seconds, and then deactivate and reactivate self-test. DO NOT turn engine off. KOER wiggle test mode is now activated. Tap, move and wiggle suspect sensor and/or harness area. If a fault is detected, a diagnostic trouble code may be stored in memory and indicated at diagnostic tester or scan tester. Retrieve code, and perform appropriate test. See DIAGNOSTIC TROUBLE CODE REFERENCE CHARTS.

scientia non olet · About LEMON Manuals