A/C System Performance
WARNING: This page is about a different car, the 1994 Lincoln Mark VIII. However, it is still accessible from the selected car via links, so may be relevant.
- Park vehicle out of direct sunlight. Connect manifold gauge set. Start and run engine at 1500 RPM. Set A/C controls to recirculate air, panel (vent) mode, full cold, and function control switch to MAX A/C.
- Set blower/fan on high speed and close doors and windows. Insert thermometer in center vent. Operate system for 10-15 minutes to allow system to stabilize. Measure temperature.
- Temperature must be 33-47°F (.6-8°C) at center vent, with high side and low side pressures within specification. See A/C SYSTEM HIGH SIDE PRESSURE SPECIFICATIONS table. Low side pressure remains constant at 25-45 psi (1.8-3.2 kg/cm2 ) throughout normal operating range.
A/C SYSTEM HIGH SIDE PRESSURE SPECIFICATIONS
| Ambient Temp. °F (°C) | psi (kg/cm2 ) |
|---|---|
| 60 (16) | 75-175 (5.3-12.3) |
| 70 (21) | 100-200 (7-14) |
| 80 (27) | 125-230 (8.8-16.2) |
| 90 (32) | 150-260 (10.5-18.3) |