Oxygen Sensor Test Mode

WARNING: This page is about a different car, the 1995 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.

This mode allows access to on-board sensor fault limits and actual values during test cycle. The test cycle has specific engine operating conditions that must be met for completion. This information is used to determine the efficiency of the catalytic converter.

To access OXYGEN SENSOR TEST mode, turn ignition switch to OFF position. Ensure test equipment is properly attached. Program scan tester using the following steps:

Select vehicle and engine selection menu (optional). See Figure .
Select year, engine, model and any additional information requested by scan tester (optional).
Follow operating instructions from scan tester menu.
Select GENERIC OBD-II FUNCTIONS.
Select OXYGEN SENSOR TESTS.
Select appropriate oxygen sensor test and follow menu instructions.