LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1994 >> Probe Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Engine Controls - Remove/Install/Overhaul - 4.6L) >> Engine Management >> Powertrain Control Module (Pcm) >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Mercury Grand Marquis, 1995 Mercury Cougar, 1995 Lincoln Town Car, 1995 Lincoln Mark VIII, and 1995 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect battery ground cable.
  2. Remove RH cowl side trim panel to expose powertrain control module (PCM).
  3. Loosen engine control sensor wiring to PCM connector retainer bolt.
  4. Remove engine control sensor wiring connector from PCM.
  5. Remove PCM from powertrain control module bracket (PCM bracket) by pulling powertrain control module downward.
  6. To install, reverse Removal procedure. Tighten engine control sensor wiring connector retainer bolt to 2.7-3.7 N-m (24-32 lb-in).
scientia non olet · About LEMON Manuals