LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1994 >> Probe Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (A/C-Heater System - Automatic) >> Testing >> A/C System Performance
April 5, 2026: LEMON Manuals is launched! Read the announcement.

A/C System Performance

WARNING: This page is about a different car, the 1994 Mercury Sable, 1994 Lincoln Continental, and 1994 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Park vehicle out of direct sunlight. Connect manifold gauge set. Start and run engine at 1500 RPM. Set A/C controls to MAX A/C (recirculated air) and maximum cold setting.
  2. Set blower/fan on high speed. Close doors and windows. Insert thermometer in center vent. Operate system for 10 minutes to allow system to stabilize. Measure center vent output temperature. Center vent temperature will be 34-46°F (1.1-7.8°C) at ambient temperature of 60-90°F (15.6-32.2°C).
  3. At about 68°F (20°C) ambient temperature, high side pressures should be approximately 178-235 psi (12.5-16.5 kg/cm2 ). Low side pressures should be approximately 24-46 psi (1.7-3.2 kg/cm2 ).
  4. As low side pressure decreases, high side pressure should increase. When A/C clutch disengages, low side pressure will increase and high side pressure should decrease. See A/C SYSTEM HIGH SIDE PRESSURE SPECIFICATIONS  table.
A/C SYSTEM PERFORMANCE SPECIFICATIONS

Ambient Temperature °F (°C) Outlet Air Temperature °F (°C)
59 (15) 34-46 (1-8)
68 (20) 34-46 (1-8)
77 (25) 34-46 (1-8)
86 (30) 34-46 (1-8)
95 (35) 36-48 (2-9)
A/C SYSTEM HIGH SIDE PRESSURE SPECIFICATIONS

Ambient Temp. °F (°C) psi (kg/cm2 )
59 (15) 75-175 (5.3-12.3)
68 (20) 178-235 (12.5-16.5)
77 (25) 125-220 (8.79-15.5)
86 (30) 130-235 (9.1-16.5)
95 (35) 175-285 (12.3-20.0)