Section 2 (Engine Controls - Tests W/Codes - EEC 2.5L): Introduction
WARNING: This page is about a different variant/trim than selected.
NOTE:
The CHECK ENGINE light, located on the instrument cluster, is referred to as Malfunction Indicator Light (MIL) in this article.
Before proceeding with this article, ensure steps in BASIC TESTING - V6 article in the ENGINE PERFORMANCE section have been performed.
If no faults were found while performing BASIC DIAGNOSTIC PROCEDURES, proceed with self-diagnostics. If no fault codes are present after entering self-diagnostics, proceed to TESTS W/O CODES - EEC 2.5L article in the ENGINE PERFORMANCE section for diagnosis by symptom.