LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1994 >> Probe GT, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Cruise Control System - 2.0L A/T) >> Testing & Diagnosis >> Pinpoint Test A - System Or Function Inoperative >> Check Circuits From Clockspring To Servo
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Circuits From Clockspring To Servo

WARNING: This page is about a different variant/trim than selected.

Disconnect servo electrical connector. Measure resistance between servo terminals 5 and same color wire in clockspring connector (harness side) at base of steering column. See Figure. Repeat procedure for servo connector terminal 6. If resistance is greater than 3 ohms repair suspect wire(s). If resistance is less than 3 ohms, check circuits for short to ground and repair as necessary. If okay, go to next step.

scientia non olet · About LEMON Manuals