LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1994 >> Probe GT, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Cruise Control System - 2.0L A/T) >> Testing & Diagnosis >> Pinpoint Test A - System Or Function Inoperative >> Check Deactivator Switch Circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Deactivator Switch Circuit

WARNING: This page is about a different variant/trim than selected.

With brake released, measure voltage between pins No. 9 and 10 of servo connector. If battery voltage exists, go to CHECK BRAKE SWITCH step. If battery voltage does not exist, disconnect Brake On/Off (BOO) switch. Measure resistance between terminals 2 and 3. See Figure If resistance is less than 5 ohms, go to next step. If resistance is greater than 5 ohms, replace deactivator switch.

scientia non olet · About LEMON Manuals