LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1994 >> Probe GT, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Cruise Control System - 2.0L A/T) >> Testing & Diagnosis >> Pinpoint Test A - System Or Function Inoperative >> Check Vehicle Speed Sensor (VSS) Circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Vehicle Speed Sensor (VSS) Circuit

WARNING: This page is about a different variant/trim than selected.

To check VSS circuit, measure resistance between pins No. 3 and 10 of servo connector. If resistance is 200-300 ohms, go to next step. If resistance is not 200-300 ohms, unplug VSS connector, located at left rear of transmission. Measure resistance between VSS terminals. If resistance is not 200-300 ohms, replace VSS. If resistance is 200-300 ohms, check for open or short in circuit.