LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1994 >> Probe SE, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Engine Controls - Remove/Install/Overhaul - 4.6L) >> Fuel System >> Throttle Position (TP) Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1995 Mercury Grand Marquis, 1995 Mercury Cougar, 1995 Lincoln Town Car, 1995 Lincoln Mark VIII, and 1995 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.

Remove distributor cap, if necessary. Disconnect TP sensor from wiring harness. Mark throttle body and TP sensor for reassembly reference. Remove mounting screws and TP sensor. To install, align tangs on TP sensor with blades on throttle shaft and install sensor on throttle body. Align marks on throttle body and TP sensor. Secure TP sensor to throttle assembly with retaining screws. Reconnect wiring.