LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1994 >> Ranger Splash, 2D Pickup, 2.3 A, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Supply Manifold Assembly >> Removal (3.0L)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal (3.0L)

  1. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE  under FUEL SYSTEM. Remove throttle body. Disconnect fuel supply and return lines. See PUSH-CONNECT FITTINGS  under FUEL SYSTEM.
  2. Disconnect wiring harness at fuel injectors. See Figure. Disconnect vacuum hose from fuel pressure regulator. Remove fuel assembly manifold bolts (2 on each side). Carefully disengage fuel supply manifold from fuel injectors by lifting and gently rocking rail.
  3. Remove injectors from fuel supply manifold, using a slight lifting/rocking motion. Place removed components in a clean container to avoid dirt or other contamination.
scientia non olet · About LEMON Manuals