Base Ignition Timing

WARNING: This page is about a different car, the 1995 Ford Windstar, 1995 Ford Ranger, and 1995 Ford Aerostar. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Ignition timing is not adjustable on models with EI.

Ensure idle speed and ignition timing are set to specification. For adjustment procedures, see ADJUSTMENTS - 3.0L article in the ENGINE PERFORMANCE section. Ensure all accessories are off and transmission is in Park or Neutral. Set parking brake. Ensure vehicle front wheels are in straight-ahead position and idle speed is correct.

NOTE: Always refer to Emission Control Label in engine compartment before attempting service. If manual and label differ, always use emission label specifications.

BASE IGNITION TIMING

Application

Degrees BTDC

All Models

⁽¹⁾ 10

⁽¹⁾	With SPOUT in-line connector unplugged.