LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1995 >> Probe Base, Standard >> Repair and Diagnosis (Single Page) >> External Pages >> Different variant/trim >> Section 4 (Engine Controls - Remove/Install/Overhaul - 2.5L) >> Fuel System >> Fuel Pressure Regulator >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page is about a different variant/trim than selected.
  1. If removing fuel pressure regulator while fuel rail assembly is still installed on engine, release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE.
  2. Remove vacuum line at pressure regulator. Remove pressure regulator mounting screws. Remove pressure regulator assembly, gasket and "O" ring.
  3. To install, ensure sealing surfaces are clean. Lubricate new "O" ring with clean engine oil. Install new "O" ring and gasket on regulator. Install fuel pressure regulator on fuel rail assembly, and tighten screws.
scientia non olet · About LEMON Manuals