LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1995 >> Probe SE, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Controls - Remove/Install/Overhaul - 2.5L) >> Fuel System >> Throttle Position (TP) Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page is about a different car, the 1995 Mercury Mystique and 1995 Ford Contour. However, it is still accessible from the selected car via links, so may be relevant.

Remove distributor cap, if necessary. Disconnect TP sensor from wiring harness. Mark throttle body and TP sensor for reassembly reference. Remove mounting screws and TP sensor. To install, align tangs on TP sensor with blades on throttle shaft and install sensor on throttle body. Align marks on throttle body and TP sensor. Secure TP sensor to throttle assembly with retaining screws. Reconnect wiring.

scientia non olet · About LEMON Manuals