LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1995 >> Windstar Base, 3.0 U >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 3.0L >> Ignition System >> Powertrain Control Module >> Removal & Installation (Aerostar)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation (Aerostar)

Disconnect negative battery cable. Remove any component necessary to gain access to the Powertrain Control Module (PCM). Loosen PCM connector retaining bolt (if equipped). Unplug harness connector from PCM. Remove 2 PCM mounting bolts. Remove PCM cover and PCM. To install, reverse removal procedure.

scientia non olet · About LEMON Manuals