Section 105 (Engine Controls - Remove/Install/Overhaul): Introduction
WARNING: This page is about a different car, the 1995 Mazda B4000, 1995 Mazda B3000, and 1995 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
Removal, overhaul and installation procedures are covered in this article. If component removal and installation is primarily an unbolt and bolt-on procedure, only a torque specification may be furnished.
NOTE:
On models with anti-theft radio, obtain code number and deactivate anti-theft system before disconnecting battery cable.