Fuel System Pressure Release
WARNING: This page is about a different car, the 1995 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.
- Remove fuel tank cap. Using Fuel Pressure Gauge (T80L-9974-B), release pressure from system at pressure relief valve (Schrader valve), located on fuel injection manifold rail.
- If fuel pressure gauge is not available, disconnect Inertia Fuel Shutoff (IFS) switch. See INERTIA FUEL SHUTOFF (IFS) SWITCH table. Remove fuel cap to release fuel tank pressure. Crank engine for 15 seconds to release system pressure.
INERTIA FUEL SHUTOFF (IFS) SWITCH LOCATION
| Application | Location |
|---|---|
| Windstar | Below Right Side Of Instrument Panel, Behind Trim Panel |