LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1996 >> Explorer 2D Utility, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Engine Controls - System/Component Tests) >> Computerized Engine Controls >> Heat Hazard Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Heat Hazard Sensor

WARNING: This page is about a different car, the 1995 Mazda RX-7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove right front seat. Lift floor mat and remove heat hazard sensor. Connect ohmmeter to sensor terminals.
  2. Heat sensor to 221-239°F (105-115°C). Continuity should exist when sensor reaches specified temperature. Replace heat hazard sensor if necessary.
scientia non olet · About LEMON Manuals