LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1996 >> Explorer 4D Utility, 5.0 P, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System And Washer System >> Testing - Component Testing >> Wiper Motor Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wiper Motor Test

  1. Disconnect negative battery terminal. Disengage linkage from motor. Unplug wiper connector. Connect Green lead from Starting and Charging System Tester (078-00005) to positive battery post.
  2. Connect Red tester lead to wiper motor terminal No. 4 (Black wire on mating connector). Connect jumper wire between motor terminal No. 5 (White wire on mating connector) and ground. Observe ammeter. Connect Red tester lead to motor terminal No. 6 (Dark Blue/Orange wire on mating connector). Again observe ammeter. Motor current should not exceed 3.5 amps for either measurement. Replace wiper motor as necessary.
scientia non olet · About LEMON Manuals