Complete System Reactivation
WARNING: This page is about a different car, the 1997 Ford Probe. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative and positive battery cables. Remove Air Bag Simulator (105-R0009) from clockspring connector. Remove Air Bag Simulator from passenger-side air bag vehicle harness connector. Install driver-side and passenger-side air bag modules.
- Position driver-side air bag module on steering wheel. Secure air bag module using 4 nut and washer assemblies. Tighten to specification. See TORQUE SPECIFICATIONS . Reconnect positive and negative battery cables. System is now reactivated. Perform system operation check to ensure SRS is functioning properly. See SYSTEM OPERATION CHECK .