LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1996 >> Ranger Splash, 2D Pickup, 2.3 A, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 2.3L >> Fuel System >> Push-Connect Fittings >> Removal & Installation (Fuel Line Coupler)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation (Fuel Line Coupler)

  1. Disengage locking tabs on connector retainer. Separate retainer halves. Disengage fitting from regulator by pushing fitting toward regulator and inserting Fuel Line Coupling Key (T90P-9550-A). See Fig 1.
  2. To reconnect fuel line coupling, push coupler tube assembly firmly into coupler body recess until fully engaged. Pull gently on both ends of coupler to ensure engagement. See procedures under FUEL SUPPLY MANIFOLD ASSEMBLY  under FUEL SYSTEM.
Fig 1: Disconnecting Fuel Line Coupler With Key
G90B15470Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals