LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1997 >> Explorer 4D Utility, 4.0 X, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Controls - Basic Testing) >> No-Start Diagnosis >> DISTRIBUTORLESS Ignition System >> Spark Check
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Spark Check

WARNING: This page is about a different car, the 1997 Mercury Mountaineer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform self diagnostic QUICK TEST to check for ignition-related fault codes, and repair as necessary. See QUICK TEST in TESTS W/CODES article. If no fault codes are retrieved, check ignition system wiring harness connectors for corrosion and tight fit. See the WIRING DIAGRAMS article. Clean or repair connectors as necessary.
  2. If wiring and connectors are okay, use Neon Bulb Spark Tester (D8IP-6666-A) to check for spark at each spark plug wire while cranking engine. If spark is strong and consistent at each spark plug (one spark per crankshaft revolution), ignition system is okay. If spark is not present, go to CIRCUIT TEST JD in TESTS W/CODES article.
scientia non olet · About LEMON Manuals