Single Switch
WARNING: This page is about a different car, the 1997 Mercury Sable and 1997 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
Remove single switch from vehicle. Measure resistance between specified terminals while operating switch. See SINGLE SWITCH TESTING TABLE. See Fig 1. Replace switch if resistance between specified terminals is greater than 5 ohms. DO NOT check resistance between terminals not specified.
SINGLE SWITCH TESTING
| Switch Position | Continuity Between Terminals |
|---|---|
| Neutral | 2 & 3; 6 & 7 |
| Up | 2 & 3; 4 & 6 |
| Down | 3 & 4; 6 & 7 |