Front Washer Inoperative
WARNING: This page is about a different car, the 1997 Mercury Tracer and 1997 Ford Escort. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition off. Disconnect washer pump motor 2-pin connector. Turn ignition on. Measure voltage between ground and washer pump motor harness connector Blue/Orange wire while pulling wiper/washer switch toward steering wheel. If battery voltage is present, go to next step. If battery voltage is not present, go to step 3).
- Turn ignition off. Measure resistance between ground and washer pump motor harness connector Black wire. If resistance is less than 5 ohms, replace washer pump motor. If resistance is greater than 5 ohms, repair Black wire between washer pump motor harness connector and ground. See WIRING DIAGRAMS .
- Test wiper/washer switch. See WIPER/WASHER SWITCH under COMPONENT TESTING. Replace switch as necessary. If switch is okay, repair Blue/Orange wire between switch and washer pump motor. See WIRING DIAGRAMS .