LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1998 >> Contour Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Controls - Remove/Install/Overhaul - 3.8L) >> Computerized Engine Controls >> Powertrain Control Module >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

WARNING: This page is about a different car, the 1998 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Remove any component necessary to gain access to PCM. For PCM location, see PCM LOCATION table. Loosen PCM connector retaining bolt (if equipped). Unplug harness connector from PCM. Remove 2 PCM mounting bolts. Remove PCM cover and PCM. To install, reverse removal procedure.

PCM LOCATION

Model Location
Windstar Cowl Area (Passenger Side)
scientia non olet · About LEMON Manuals