LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1998 >> Crown Victoria Base, 4.6 9 >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Controls - System & Component Testing 4.6L) >> Computerized Engine Controls >> Powertrain Control Module (Pcm) >> Power Circuits
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Circuits

WARNING: This page is about a different car, the 1998 Mercury Grand Marquis and 1998 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition off. Using a voltmeter, check for battery voltage between ground and PCM terminal No. 55 (KAPWR). Turn ignition switch to START or RUN position. Check for battery voltage between ground and PCM connector terminals No. 71 and 97 (VPWR). If battery voltage is not present, power is not being supplied from EEC power relay. See CIRCUIT TEST B in appropriate article:

PCM LOCATIONS

Model Location
Grand Marquis & Town Car Behind Master Cylinder
Fig 1: Identifying PCM 104-Pin Connector Terminals
G96E29185