Specifications Index
RANGER SPECIFICATIONS INDEX
| System | Specification/Procedure | |||
|---|---|---|---|---|
| Air Conditioning | ||||
| Service | A/C SYSTEM SPECIFICATIONS | |||
| Torque | TORQUE SPECIFICATIONS | |||
| Battery | 58 amp/hr | |||
| Brakes | ||||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | |||
| Disc Brakes | DISC BRAKE SPECIFICATIONS | |||
| Drum Brakes | DRUM BRAKE SPECIFICATIONS | |||
| Torque | TORQUE SPECIFICATIONS | |||
| Charging | ||||
| Generator | GENERAL SPECIFICATIONS | |||
| Torque | TORQUE SPECIFICATIONS | |||
| Drive Belts | ||||
| Adjustment | BELT ADJUSTMENT | |||
| Belt Routing | DRIVE BELT ROUTING | |||
| Engine Cooling | ||||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | |||
| Radiator Cap Pressure | 89-124 kPa (13-18 psi) | |||
| Water Pump R & I | ||||
| 2.5L 4-Cylinder | WATER PUMP | |||
| 3.0L V6 | WATER PUMP | |||
| 4.0L V6 | WATER PUMP | |||
| Engine Mechanical | ||||
| 2.5L 4-Cylinder | ||||
| Compression | ENGINE COMPRESSION | |||
| Oil Pressure | Normal oil pressure at 2000 RPM should be 40-60 psi (2.8-4.2 kg/cm2 ) with engine at normal operating temperature. | |||
| Overhaul | ENGINE SPECIFICATIONS | |||
| Torque | TORQUE SPECIFICATIONS | |||
| 3.0L V6 | ||||
| Compression | ENGINE COMPRESSION | |||
| Oil Pressure | Normal oil pressure at 2500 RPM should be 40-60 psi (2.8-4.2 kg/cm2 ) with engine at normal operating temperature. | |||
| Overhaul | ENGINE SPECIFICATIONS | |||
| Torque | TORQUE SPECIFICATIONS | |||
| 4.0L V6 | ||||
| Compression | ENGINE COMPRESSION | |||
| Oil Pressure | Oil pressure with engine at normal operating temperature is 40-60 psi (2.8-4.2 kg/cm2 ) at 2000 RPM. | |||
| Overhaul | ENGINE SPECIFICATIONS | |||
| Torque | TORQUE SPECIFICATIONS | |||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab.From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | |||
| Flywheel/Flex Plate Torque | ||||
| 2.5L 4-Cylinder | 54-64 Ft. Lbs. (73-87 N.m) | |||
| 3.0L V6 | 54-64 Ft. Lbs. (73-87 N.m) | |||
| 4.0L V6 | TORQUE SPECIFICATIONS | |||
| Fuel System | ||||
| Fuel Filter Location | Inside of frame rail under left side door, mounted in bracket. | |||
| Pressure Release Procedure | ||||
| 2.5L 4-Cylinder | FUEL PRESSURE RELEASE | |||
| 3.0L V6 | FUEL PRESSURE RELEASE & FUEL LINE CONNECTIONS | |||
| 4.0L V6 | FUEL PRESSURE RELEASE | |||
| Pressure Specification | FUEL PRESSURE SPECIFICATIONS | |||
| Fuel Pressure Test Procedure | ||||
| 2.5L 4-Cylinder | FUEL PRESSURE | |||
| 3.0L V6 | FUEL PRESSURE | |||
| 4.0L V6 | FUEL PRESSURE | |||
| Fuel Filter R & I | ||||
| 2.5L 4-Cylinder | REMOVAL & INSTALLATION | |||
| 3.0L V6 | REMOVAL & INSTALLATION | |||
| 4.0L V6 | REMOVAL & INSTALLATION | |||
| Ignition | ||||
| Firing Order | ||||
| 2.5L 4-Cylinder | FIRING ORDER & CYLINDER IDENTIFICATION | |||
| 3.0L V6 | FIRING ORDER & CYLINDER IDENTIFICATION | |||
| 4.0L V6 | FIRING ORDER & CYLINDER IDENTIFICATION | |||
| Ignition Wires (Resistance) | ||||
| 2.5L 4-Cylinder | HIGH TENSION WIRE RESISTANCE | |||
| 3.0L V6 | HIGH TENSION WIRE RESISTANCE | |||
| 4.0L V6 | HIGH TENSION WIRE RESISTANCE | |||
| Ignition Wires (Routing) | ||||
| 2.5L 4-Cylinder | FIRING ORDER & TIMING MARKS | |||
| 3.0L V6 | FIRING ORDER & TIMING MARKS | |||
| 4.0L V6 | FIRING ORDER & TIMING MARKS | |||
| Spark Plug | ||||
| 2.5L 4-Cylinder | ||||
| Type | AWSF-32F Or AWSTF-32F | |||
| Gap | .042-.046 In. (1.07-1.17 mm) | |||
| Torque | 7-14 Ft. Lbs. (9-20 N.m) | |||
| 3.0L V6 | ||||
| Type | Original spark plug: Motorcraft AWSF-32P/AWSF-32PG Service spark plug: Motorcraft AGSF-32PP Flex Fuel spark plug: Motorcraft AGSF-12PP |
|||
| Gap | .042-.046 In. (1.07-1.17 mm) | |||
| Torque | 7-14 Ft. Lbs. (9-20 N.m) | |||
| 4.0L V6 | ||||
| Type | ||||
| Cylinders No. 1-3 | Original spark plug: Motorcraft AGRF-22PG Service spark plug: Motorcraft AGSF-22PP |
|||
| Cylinders No. 4-6 | Original spark plug: Motorcraft AGRF-22P Service spark plug: Motorcraft AGSF-22PP |
|||
| Gap | .052-.056 In. (1.32-1.42 mm) | |||
| Torque | 7-14 Ft. Lbs. (9-20 N.m) | |||
| Starting | ||||
| Starter | STARTER SPECIFICATIONS | |||
| Torque | TORQUE SPECIFICATIONS | |||
| Wheel Alignment | ||||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | |||
| Torque | TORQUE SPECIFICATIONS | |||
| Wheel & Tire | ||||
| Wheel Lug Nut Torque | 100 Ft. Lbs. (135 N.m) WARNING: Failure to retighten wheel lug nuts at 500 miles after installation, may result in wheel coming loose and loss of vehicle control. |
|||