Sun and Shell Assembly - Disassembly: Disassembly

WARNING: This page is about a different car, the 2003 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front sun shell.

Fig 1: Removing Front Sun Shell
Courtesy of FORD MOTOR CO.
Remove the No. 11 needle bearing.

Fig 2: Removing Needle Bearing
Courtesy of FORD MOTOR CO.
Remove the intermediate clutch hub.
Remove the No. 10 thrust bearing.

Fig 3: Removing Intermediate Clutch Hub
Courtesy of FORD MOTOR CO.
Remove the overdrive drum.

Fig 4: Removing Thrust Bearing
Courtesy of FORD MOTOR CO.
Remove the one-way clutch assembly.
1. Remove the one-way clutch assembly.
2. Remove the top cap.
3. Remove the one-way clutch.
4. Remove the bottom cap.
  
  Fig 5: Removing Overdrive Drum
  Courtesy of FORD MOTOR CO.
Fig 6: Removing One-Way Clutch Assembly
Courtesy of FORD MOTOR CO.