Torque

GENERAL SPECIFICATIONS
Oil Pump Gear Backlash 0.02-0.03 mm (0.008-0.012 inches)
Oil Pump Gear Radial Clearance
(Idler and Drive) 0.125-0.050 mm (0.0055-0.002 inches)
Oil Pump Gear End Height (Extends Beyond Housing) 0.140-0.050 mm (0.0055-0.0005 inches)
Idler Shaft to Idler Gear Clearance 0.044-0.010 mm (0.0017-0.0005 inches)
Driver Shaft to Housing Clearance 0.076-0.038 mm (0.0030-0.0015 inches)


TORQUE SPECIFICATIONS
Oil Pump and Filter Body to Engine Front Cover Bolt
Large 25-30 Nm (18-22 Ft. Lbs.)
Small 8-11 Nm (71-97 Inch Lbs.)