Master Window Switch Assembly
Remove master window switch assembly. See WINDOW SWITCH under REMOVAL & INSTALLATION. Check continuity between terminals as specified while operating switch. See MASTER WINDOW SWITCH ASSEMBLY TESTING table. See Figure . If continuity does not exist between specified terminals, replace master window switch assembly.
MASTER WINDOW SWITCH ASSEMBLY TESTING
| Switch Position | Continuity Between Terminals No. | |||
|---|---|---|---|---|
| All | (1) | |||
| Neutral | 6 & 12; 7 & 13; 8 & 14; 9 & 15 | |||
| Left | ||||
| Up | 6 & 10; 7 & 13 | |||
| Down | 6 & 12; 10 & 13 | |||
| Right | ||||
| Up | 8 & 11; 9 & 15 | |||
| Down | 8 & 14; 11 & 15 | |||
|
||||