LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1999 >> Escort ZX2, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Engine Controls - System & Component Testing 2.0L) >> Computerized Engine Controls >> Powertrain Control Module (Pcm) >> Power Circuits
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Circuits

WARNING: This page is about a different car, the 1998 Mercury Tracer and 1998 Ford Escort. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition off. Using a voltmeter, check for battery voltage between ground and PCM terminal No. 55 (KAPWR). Turn ignition switch to START or RUN position. Check for battery voltage between ground and PCM connector terminals No. 71 and 97 (VPWR). If battery voltage is not present, power is not being supplied from EEC power relay. See CIRCUIT TEST B in appropriate article:

PCM LOCATIONS

Model Location
Escort & Tracer Below Center Of Instrument Panel
Escort ZX2 In Center Console
Fig 1: Identifying PCM 104-Pin Connector Terminals
G96E29185