Recalling Programmed Seat Positions

To initiate memory recall, vehicle must be in Park, or Neutral, and ignition switch MUST NOT be in START position. Memory seat recall can be initiated from driver's door memory switch or remote entry transmitter. Seat positions 1 and 2 can be initiated by pressing respective buttons on memory switch. Seat position 3 is initiated by simultaneously pressing buttons 1 and 2 on memory switch.

Remote entry transmitters are assigned personality numbers 1, 2 or 3 at manufacturer. Personality designation is marked on back of remote transmitter. When UNLOCK switch on remote transmitter is pressed first time, seat memory position corresponding to transmitter personality number will be initiated.