Test 6: Passive Anti-Theft System (Pats) Module Does Not Respond To NGS Tester
WARNING: This page is about a different car, the 1999 Mazda B4000, 1999 Mazda B3000, and 1999 Mazda B2500. However, it is still accessible from the selected car via links, so may be relevant.
Measure resistance of Tan/Orange wire between Passive Anti-Theft System (PATS) module harness connector terminal No. 6 and DLC terminal No. 2. See Figure and Figure . Measure resistance of Pink/Light Blue wire between PATS module harness connector terminal No. 5 and DLC terminal No. 10. If resistance in both wires is 5 ohms or less, replace PATS module. If resistance in either wire is greater than 5 ohms, repair wire(s) between DLC and PATS module harness connector. Retest system for normal operation.