Using the Keyless Entry Keypad (If Equipped)
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
A manual enable/disable mode allows the autolock feature to be turned off and on.
- Enter the 5-digit permanent entry code into the keyless entry keypad.
- Within 5 seconds of entering the code, press and hold the 7/8 button on the keypad.
- Within 5 seconds of Step 2, and while holding the 7/8 button, press the 3/4 button on the keypad and release it.
- Within 5 seconds of Step 3, release the 7/8 button on the keypad.
NOTE:
If the autolock is disabled, the horn chirps once. If the autolock feature is enabled, the horn chirps once shortly and then sounds a second time for a longer sound of the horn once the above sequence is completed.