LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2184 (Cruise Control System) >> Diagnostic Tests >> Speed Control >> Pinpoint Tests >> Pinpoint Test E: A Single Speed Control Button Is Inoperative >> Normal Operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Normal Operation

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

The speed control actuator sends a signal through circuit VES10 (WH) to the speed control switches, which passes through the clockspring. The return signal is sent back through the clockspring to circuit RES08 (GN/BN). When 2 buttons are pressed simultaneously, the speed control system enters a stand-by mode.

This pinpoint test is intended to diagnose the following:

scientia non olet · About LEMON Manuals