Removal And Installation

WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery ground cable. For additional information, refer to BATTERY .
Remove the passenger air bag module. Refer to PASSENGER-SIDE AIR BAG MODULE .
Reposition the central security module.
1. Remove the three screws.
2. Pull the central security module straight out from the bracket.
Fig 1: Pulling Central Security Module Straight Out From Bracket
Courtesy of FORD MOTOR CO.
Disconnect the two electrical connectors.

Fig 2: Disconnecting Two Electrical Connectors
Courtesy of FORD MOTOR CO.
Remove the bracket from the central security module.

Fig 3: Removing Bracket From Central Security Module
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.