Restraints Control Module (RCM): Removal
WARNING: This page is about a different car, the 2002 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Position front seats fully forward. Disable air bag system. See DISABLING SYSTEM under DISABLING & ACTIVATING AIR BAG SYSTEM. Position carpet back on right side of center tunnel.
- Remove RCM mounting bolts from right side of RCM. Remove lower left side center instrument panel finish panel. Position carpet back on left side of center tunnel. Disconnect RCM harness connectors. Remove remaining RCM mounting bolt and remove RCM.