LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1308 (Body Closures) >> General Procedures. >> Door Alignment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Door Alignment

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

    Front and Rear Door 

  1. Loosen the door latch striker bolts.
  2. Front Door Horizontal and Vertical Adjustment 

  3. Loosen the front door hinge-to-door bolts.
  4. Adjust the front door.
  5. Tighten the front door hinge-to-door bolts.
    • Tighten to 30 Nm (22 lb-ft)
  6. Front Door Fore and Aft Adjustment 

  7. Remove the fender splash shield. For additional information, refer to FRONT END BODY PANELS .
  8. Remove the fender insulator panel.
  9. Loosen the door hinge-to-body bolts.
  10. Adjust the front door.
  11. Tighten the front door hinge-to-body bolts.
    • Tighten to 30 Nm (22 lb-ft)
  12. Rear Door Horizontal and Vertical Adjustment 

  13. Loosen the rear door hinge-to-door bolts.
  14. Adjust the rear door.
  15. Tighten the rear door hinge-to-door bolts.
    • Tighten to 30 Nm (22 lb-ft)
  16. Rear Door Fore and Aft Adjustment 

  17. Loosen the rear door hinge-to-body bolts.
  18. Adjust the rear door.
  19. Tighten the rear door hinge-to-body bolts.
    • Tighten to 30 Nm (22 lb-ft)
  20. Front and Rear Door 

  21. Tighten the door latch striker bolts.
    • Tighten to 40 Nm (30 lb-ft)