Memory Set Switch
WARNING: This page is about a different car, the 2002 Lincoln Blackwood. However, it is still accessible from the selected car via links, so may be relevant.
Remove memory set switch. See MEMORY SET SWTICH under REMOVAL & INSTALLATION. With switch in any position, continuity should exist between terminals No. 8 and 9. See Figure. With MEM1 button pressed, continuity should exist between terminals No. 4 and 6. With MEM2 pressed, continuity should exist between terminals No. 3 and 6. With SET button pressed, continuity should exist between terminals No. 1 and 6. If continuity is not as specified, replace memory set switch.