Component Testing Procedure
WARNING: This page is about a different car, the 2006 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
EXTERIOR REAR VIEW MIRROR SWITCH COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Left mirror | Selector switch Left | ||
| Up | 6 and 3 4 and 1 |
Up | Closed circuit |
| Down | 6 and 1 4 and 3 |
Down | Closed circuit |
| Left | 6 and 7 4 and 3 |
Left | Closed circuit |
| Right | 6 and 3 4 and 7 |
Right | Closed circuit |
| Right mirror | Selector switch Right | ||
| Up | 6 and 3 4 and 2 |
Up | Closed circuit |
| Down | 6 and 2 4 and 3 |
Down | Closed circuit |
| Left | 6 and 5 4 and 3 |
Left | Closed circuit |
| Right | 6 and 3 4 and 5 |
Right | Closed circuit |