Autolock Enable/Disable - Using the Remote Keyless Entry (RKE) Keypad
WARNING: This page is about a different car, the 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
A manual enable/disable mode allows the autolock feature to be turned off and on.
To enable or disable autolock using the RKE keypad:
- Enter the 5-digit permanent entry code into the RKE keypad.
- Within 5 seconds of entering the code, press and hold the 7/8 button on the RKE keypad.
- Within 5 seconds of Step 2, and while holding the 7/8 button, press the 3/4 button on the RKE keypad and release it.
- Within 5 seconds of Step 3, release the 7/8 button on the RKE keypad.
If the autolock feature is disabled, the horn chirps once. If the autolock feature is enabled, the horn chirps once shortly and then sounds a second time for a longer duration.