With Message Center

WARNING: This page is about a different car, the 2007 Lincoln Mark LT and 2007 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Compass Calibration Zone Map

Courtesy of FORD MOTOR CO.

NOTE: The compass zone setting is preset from the factory to Zone 8.

Determine which magnetic zone you are in for your geographic location.
Locate the compass module at the base of the mirror.

Fig 2: Locating Compass Module At Base Of Mirror
Courtesy of FORD MOTOR CO.
Turn the ignition key to the ON position.

NOTE: To exit the compass zone adjustment before carrying out the compass zone adjustment procedure, press the INFO button on the message center switch.

Fig 3: Identifying Reset Button

Courtesy of FORD MOTOR CO.

Press and hold the reset button on the LH top of the compass module until RESET FOR ZONE and the current setting (1-15) appears in the message center display.
Press the SETUP button on the message center switch repeatedly until the correct geographic location for your area is displayed in the message center.
Press the RESET button to exit the zone setting procedure and to lock your selected zone setting. The message center displays CALIBRATION COMPLETE.