Inspection and Verification

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

This section provides step-by-step module configuration procedures. Carry out the programmable module installation (PMI) procedure in this article when another workshop manual section directs to carry out configuration or when DTCs from the below list are present:

DIAGNOSTIC TROUBLE CODE (DTC) INDEX

DTC	Description	Source	Action
B2477	Module Configuration Failure	Anti-lock brake system (ABS) module Instrument cluster Restraints control module (RCM) Vehicle security module Four wheel drive (4WD) control module	CARRY OUT PMI. REFER to Programmable Module Installation in this article.
P0602	Powertrain Control Module Programming Error	Powertrain control module (PCM)	CARRY OUT PMI. REFER to Programmable Module Installation in this article.
P0605	Internal Control Module Read Only Memory (ROM) Error	PCM	CARRY OUT PMI. REFER to Programmable Module Installation in this article.
P1639	Vehicle ID Block Corrupted, Not Programmed	PCM	CARRY OUT PMI. REFER to Programmable Module Installation in this article.
U0300	Internal Control Module Software Incompatibility	PCM	CARRY OUT PMI. REFER to Programmable Module Installation in this article.
U2050	No Application Present	ABS module	REFER to VEHICLE DYNAMIC SYSTEMS article.
U2050	No Application Present	PCM	CARRY OUT PMI. REFER to Programmable Module Installation in this article.
U2051	One or More Calibration Files Missing / Corrupt	ABS module	REFER to VEHICLE DYNAMIC SYSTEMS article.
U2051	One or More Calibration Files Missing / Corrupt	PCM	CARRY OUT PMI. REFER to Programmable Module Installation in this article.