Connecting Rod Cleaning

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Do not use a caustic cleaning solution or damage to connecting rods can occur.

NOTE: The connecting rod large end is a matched set. The connecting rod cap must be installed on the original connecting rod in the original position. Do not reverse the cap. Parts are not interchangeable.

Mark and separate the parts and clean with solvent. Clean the oil passages.

Fig 1: Identifying Connecting Rod Cap Is A Matched Set

Courtesy of FORD MOTOR CO.