Valve Guide Inner Diameter

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Refer to SPECIFICATIONS .

NOTE: Valve guides tend to wear in an hourglass pattern. The ball gauge can be inserted into the combustion chamber side of the valve guide, if necessary.

Use a ball gauge to determine the inside diameter of the valve guides in 2 directions at the top, middle and bottom of the valve guide.

Fig 1: Measuring Valve Guide Inner Diameter

Courtesy of FORD MOTOR CO.

Measure the ball gauge with a micrometer.

Fig 2: Measuring Ball Gauge With Micrometer

Courtesy of FORD MOTOR CO.

If the valve guide is not within specifications, install a new cylinder head assembly.