Torque Specifications Table
WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS TABLE
| Description | Nm | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| Anchor bolt | 10 | - | 89 | ||
| Breather cover bolts | 10 | - | 89 | ||
| Case cover bolts | 45 | 33 | - | ||
| Clutch housing-to-oil pan bolts | 48 | 35 | - | ||
| Clutch slave cylinder bolts | 20 | - | 177 | ||
| Clutch tube hydraulic line bracket bolts | 22 | 16 | - | ||
| Control arm bolt | 12 | - | 106 | ||
| Drain plug | 49 | 36 | - | ||
| Fill plug | 49 | 36 | - | ||
| Oil pan-to-clutch housing bolts | 48 | 35 | - | ||
| Primary and secondary shaft locknuts | 160 | 118 | - | ||
| Reverse idler shaft lock bolt | 22 | 16 | - | ||
| Roll restrictor bracket bolts | 90 | 66 | - | ||
| Roll restrictor bracket through bolt | 90 | 66 | - | ||
| Roll restrictor-to-subframe through bolt | 90 | 66 | - | ||
| Shim selection set bolts | 45 | 33 | - | ||
| Shift control selector plate bolts (1) | - | - | - | ||
| Shift detent bolt | 18 | - | 159 | ||
| Shift gate bolt | 13 | - | 115 | ||
| Shift lever assembly bolts | 22 | 16 | - | ||
| Shift rail guide bolt | 12 | - | 106 | ||
| Splash shield bolts | 9 | - | 80 | ||
| Transaxle case bolts | 45 | 33 | - | ||
| Transaxle rear support insulator bolt and nuts | 80 | 59 | - | ||
| Transaxle rear support insulator-to-frame bolts (upper and lower) (4 required) | 63 | 46 | - | ||
| Transaxle-to-engine bolts | 48 | 35 | - | ||
| Upper transaxle-to-engine bolts | 48 | 35 | - | ||
| Vehicle Speed Sensor (VSS) bolt | 9 | - | 80 | ||
|
|||||