LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 2470 (Information System And Entertainment System) >> Removal And Installation >> Front Controls Interface Module (FCIM) >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If the Front Controls Interface Module (FCIM) is being replaced, it must be replaced as an assembly with the middle center instrument panel center finish panel. However, the middle center instrument panel center finish panel can be replaced individually if the FCIM  does not need to be replaced. For additional information on installing a new middle instrument panel center finish panel, refer to INSTRUMENT PANEL AND CONSOLE .
  1. Remove the Audio Control Module (ACM). For additional information, refer to AUDIO CONTROL MODULE (ACM) .
  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals