Section 394 (Manual Transmission): Specifications
WARNING: This page is about a different car, the 2002 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
General Specifications Table
| Item | Specification |
|---|---|
| Output shaft maximum runout | 0.05 mm (0.002 in) |
| Shift fork to synchronizer sleeve | 0.8 mm (0.031 in) |
| Synchronizer blocking ring to gear | 1.5 mm (0.059 in) |
| Third/fourth clutch hub end play | 0.00-0.05 mm (0.00-0.0019 in) |
| Reverse idler gear end play | 0.1-0.2 mm (0.0039-0.0078 in) |
| Fifth/reverse hub end play | 0.00-0.05 mm (0.00-0.0019 in) |
| Countershaft reverse gear end play | 0.25-0.35 mm (0.0098-0.0137 in) |
| Lubricant | |
| MERCON® Multi-Purpose Automatic Transmission Fluid XT-2-QDX or -DDX | MERCON® |
| Gasket Maker F8AZ-19B508-AB | WSK-M2G348-A5 |
| Pipe Sealant with Teflon® D8AZ-19554-A | WSK-M2G350-A2 |
TORQUE SPECIFICATIONS
| Description | Nm | Lb-Ft |
|---|---|---|
| Reverse lamp switch | 30 | 22 |
| Case cover bolts | 19 | 14 |
| Counter lever shaft bolt | 9 | 7 |
| Countershaft lock nut | 162 | 119 |
| Crossmember bolts | 63 | 46 |
| Crossmember nuts | 63 | 46 |
| Drain plug | 48 | 36 |
| Dust cover bolts | 9 | 7 |
| Extension housing bolts | 39 | 29 |
| Fifth/reverse shift rail bolt | 25 | 18 |
| Fifth/reverse lock plate bolt | 9 | 7 |
| Fluid passage bolt | 9 | 7 |
| Front bearing retainer bolts | 19 | 14 |
| Gear selector interlock bolts | 9 | 7 |
| Inner gearshift lever boot bolts | 9 | 7 |
| Output shaft lock nut | 245 | 181 |
| Rear bearing retainer bolts | 22 | 16 |
| Reverse idler shaft bolt | 98 | 72 |
| Shift plate bolts | 8-10 | 6-8 |
| Transmission bolts | 60 | 44 |
| Transmission mount bolts | 98 | 72 |
| Transmission mount nuts | 98 | 72 |